Bewator BC615EM User Manual download pdf (Page 28)

28 BC615 Installation and User Manual

Program time zones

This function is used to program the time zones to be used in the

installation.

1 Take out the completed time zone chart/s.

2 Set the card reader to programming mode.

3 Press A31. z

4 Enter the number of the time zone to be programmed. Use two

digits, e.g. 01 for time zone 1.

5 Enter the starting time of the first time interval using four digits,

e.g. 0800 for 8 am.

6 Enter the finishing time of the first time interval using four digits,

e.g. 1159 for 11.59 pm.

If there is no need for a second time interval, press A to skip. Go to

step 9.

7 Enter the start time of the second time interval using four digits,

e.g. 1300 for 1 pm.

8 Enter the stop time of the second time interval using four digits,

e.g. 1659 for 16.59 pm.

9 Enter the desired day type/s for this time zone.

10 Press B and go to step 4 to program another time zone or press B

twice to go back to programming mode.

Erase a time zone

1 Set the card reader to programming mode.

2 Press A31. z

3 Enter the number of the time zone to be erased.

4 Press A.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

No comments

Bewator BC615EM User Manual Page 28