Bewator BC610 Technical Information download pdf (Page 13)

Bewacard 610 Technical Manual 13

Set password

The first thing to do before starting to programme the card reader is to

set a password.

1 Open the card reader with the key supplied. The lock is located on

the underside of the card reader.

2 Press the SW1 button (see wiring diagram on page 8).

3 Enter the desired 6-digit password on the card reader’s keypad.

The password is now set.

Set the card reader to programming mode

To program a function, the card reader has to be in programming mode.

Proceed as follows:

1 Press B. 

2 Enter the 6-digit password. 

The card reader is now in programming mode.

Note! If the wrong password is entered two times in succession, the

card reader is blocked from further attempts for 10 seconds. From then

on the card reader is blocked for 40 seconds each time two incorrect

passwords are entered.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Bewator BC610 Technical Information Page 13