Bewator BC610 Technical Information download pdf (Page 14)

14 Bewacard 610 Technical Manual

Log on a card (with a card)

Using this function, the cards to be used are programmed in to the card

reader.

1 Set the card reader to programming mode.

2 Press A01. zz

3 Swipe the card. If the card is already in the reader, the ”faulty

programming” signal is heard.

4 Swipe the next card, as required.

5 When finished, press B to go back to programming mode.

6 Press B one more time to leave programming mode.

Log on a card (without the card)

Using this function cards can be programmed by keying in the card

number.

1 Set the card reader to programming mode.

2 Press A03. zz

3 Enter the card number on the keypad. If the card is already logged

on, the ”faulty programming” signal is heard.

4 Key in the next card, as required.

5 When finished, press B to go back to programming mode.

6 Press B one more time to leave programming mode.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Bewator BC610 Technical Information Page 14