Bewator BC610 Technical Information download pdf (Page 26)

26 Bewacard 610 Technical Manual

Troubleshooting

Problem Possible cause Action

Red, yellow and green

LEDs blink on voltage

feed.

A button is pressed.

Memory error.

Adjust the button.

Change card reader.

Cannot enter

programming mode.

Red LED is lit after two

trials.

Wrong password. Choose a new password.

Green LED is lit on

accepted entrance but

the door does not open.

Lock error.

The jumper between

terminal block nos. 1

and 4 in the card

reader is missing.

Check cable between card

reader and lock. Change

locks.

Attach jumper.

A card is swiped

through the card reader

but nothing happens. No

beep is heard.

The reader head is

loose.

The reader head is

dirty.

The reader head is

damaged.

Tighten the reader head.

Clean the reader head

using a special cleaning

card.

Change card reader or

reader head.

A card is swiped

through the reader, a

beep is heard, but

nothing happens.

The card is not logged

on.

Card + PIN is the

current security level

and the card does not

have a PIN code.

Log on the card.

Select a PIN code.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments